Cotton dyes, brighteners are mostly anion type, and cotton whitening is basically completed on the molding machine.Additional dyeing cloth when light is wrong need to fine tune the color, repairing color usually when the soft finishing agent on the additional small dye or paint, and factories use normal general silicone oil (weak cationic) will produce charge attract reaction of Yin and Yang, cause condensation and sticky roller, and anion silicone oil feel softness and can not meet the requirements, cause confusion of the factory.Charge consistency must be considered in machining.

Cotton long car dyeing the cloth through drying drum drying, large package or heap in cloth box, if not fully cooling, especially in large volumes cloth, in the soft fabric surface temperature may be higher, the cause of groove working liquid temperature (especially in summer), sometimes to 60 ℃ above, and ordinary silicone oil can cause sticking when heat resistance is not good.
The temperature in the rolling groove should not exceed 40 ℃.

The speed of finalize machine

When the factory is making some thin fabrics, the speed of setting is very fast, sometimes up to 60 meters/min. Due to poor permeability of ordinary silicone oil, the silicone oil flows backwards on the roll, resulting in sticky roll.Pay attention to replace the working fluid in the rolling groove, wipe the roll frequently.